 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC435MS8G / 435MS8GE v03.0607 SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Typical Applications The HMC435MS8G / HMC435MS8GE is ideal for: * Basestation Infrastructure * MMDS & 3.5 GHz WLL * CATV/CMTS * Test Instrumentation Features High Isolation: 60 dB @ 1 GHz 50 dB @ 2 GHz Positive Control: 0/+5V 51 dBm Input IP3 Non-Reflective Design MS8G SMT Package, 14.8 mm2 9 SWITCHES - SMT Functional Diagram General Description The HMC435MS8G & HMC435MS8GE are nonreflective DC to 4 GHz GaAs MESFET SPDT switches in low cost 8 lead MSOP8G surface mount packages with exposed ground paddles. The switch is ideal for cellular/PCS/3G basestation applications yielding 50 to 60 dB isolation, low 0.8 dB insertion loss and +50 dBm input IP3. Power handling is excellent up through the 3.5 GHz WLL band with the switch offering a P1dB compression point of +31 dBm. Onchip circuitry allows positive voltage control of 0/+5 Volts at very low DC currents. Electrical Specifications, TA = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System Parameter Insertion Loss Frequency DC - 2.5 GHz DC - 3.6 GHz DC - 4.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.6 GHz DC - 4.0 GHz DC - 2.5 GHz DC - 3.6 GHz DC - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 1.0 GHz 0.5 - 2.5 GHz 0.5 - 4.0 GHz DC - 4.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 40 60 ns ns 56 46 43 37 30 15 13 11 16 27 48 45 41 Min. Typ. 0.8 1.2 1.5 60 50 47 41 35 20 17 15 21 31 51 48 45 Max. 1.0 1.5 1.8 Units dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm Isolation (RFC to RF1/RF2) Return Loss (On State) Return Loss (Off State) Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Switching Speed 9 - 256 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC435MS8G / 435MS8GE v03.0607 SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Insertion Loss 0 Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 RFC RF1, RF2 OFF RF1, RF2 ON INSERTION LOSS (dB) -1 -2 + 25C + 85C - 40C -3 -4 -5 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 0 0.5 1 1.5 2 2.5 3 3.5 4 9 SWITCHES - SMT FREQUENCY (GHz) Isolation Between Ports RFC and RF1 / RF2 0 -10 -20 -30 -40 -50 -60 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RF1 RF2 Isolation Between Ports RF1 and RF2 0 -10 -20 -30 -40 -50 -60 -70 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) RFC - RF1 ON RFC - RF2 ON ISOLATION (dB) 0.1 and 1 dB Input Compression Point 35 INPUT COMPRESSION (dBm) Input Third Order Intercept Point 60 58 56 +25 C +85 C -40 C 30 INPUT IP3 (dBm) 1 dB Compression Point 0.1 dB Compression Point ISOLATION (dB) 3 3.5 4 54 52 50 48 46 44 42 25 20 15 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 40 0 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 257 HMC435MS8G / 435MS8GE v03.0607 SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Control Voltages *Control Input Tolerances are 0.2 Vdc State Low High Bias Condition* 0 Vdc @ 25 A Typical +5 Vdc @ 25 A Typical Absolute Maximum Ratings Control Voltage Range Storage Temperature Operating Temperature RF Input Power Vctl = 0/+5V ESD Sensitivity (HBM) -0.5 to +7.5 Vdc -65 to +150 C -40 to +85 C +31 dBm Class 1A Truth Table Control Input Signal Path State B High Low RFC to: RF1 RF2 A Low High 9 SWITCHES - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS DC blocks are required at ports RFC, RF1, RF2. Do not operate continuously at RF power input greater than 1 dB compression and do not "Hot Switch" power levels greater than +24 dBm (control = 0/+5 Vdc). 9 - 258 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC435MS8G / 435MS8GE v03.0607 SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Outline Drawing 9 SWITCHES - SMT 9 - 259 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC435MS8G HMC435MS8GE Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H435 XXXX H435 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC435MS8G / 435MS8GE v03.0607 SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Pin Descriptions Pin Number 1 Function A Description See truth and control voltage tables. Interface Schematic 2 B See truth and control voltage tables. 3, 5, 8 RFC, RF1, RF2 These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 9 SWITCHES - SMT 4 N/C Not Connected 6, 7 GND Package bottom has exposed metal paddle that must be connected to PCB RF ground as well. 9 - 260 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC435MS8G / 435MS8GE v03.0607 SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz Evaluation PCB 9 SWITCHES - SMT List of Materials for Evaluation PCB 105143 [1] Item J1 - J3 J4 - J7 C1 - C3 R1 - R2 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 100 Ohm Resistor, 0402 Pkg. HMC435MS8G / HMC435MS8GE SPDT Switch 104122 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. Note: Pin J6 is unused and need not be connected. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 261 |
Price & Availability of HMC435MS8G07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |